| Sulfur | Sulfur has insectici... |
| Caustic so | Caustic soda solutio... |
| Caustic so | Caustic soda flake i |
| Soda ash | Soda ash used in foo... |
| Aluminum o | Aluminum oxide white |
| Loctite | Loctite a revolution... |
+86-351-4080661
Loctite companies are anaerobic adhesive pioneer, it uses this technique for the production of plastic holders increased cylindrical screw with pieces of the shear strength of. Loctite plastic holders fills the space between the inner parts and cured into a strong with precision, it has been used as a standard method was widely accepted, for assembling press-fit and paddled with parts. Loctite plastic holders with different viscosity, gap fill capability, flexible, and strength characteristics; can be used to process equipment automatic coating or artificial glue.
Loctite®660 fast metalRetaining adhesive
Need not be in the processing will be able to repair wear coaxial parts; repair the wear bearing seat, keys, keyways, cone or on the shim for solid special operations. CFIA certification.
|
Strength requirement |
high |
|
Cutting Strength |
23 |
|
radial clearance |
To 0.5mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
20min/24hours |
|
Packing specification-No. |
50ml tube |
Loctite®641Retaining adhesive
.jpg)
The product is of low intensity bonding. Applicable to the need for dismantlement of cylindrical parts. CFIA certification.
|
Strength requirement |
low |
|
Cutting Strength |
11.7 |
|
radial clearance |
to 0.15mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
20min/24hours |
|
Packing specification-No. |
50ml bottle |
Loctite®609 Retaining adhesive
Apply for the subsequent disassembly of the components, namely; on the shaft or bearing fixing operation. Mil-Spec ( R-46082B ) I.
|
Strength requirement |
中 |
|
Cutting Strength |
15.8 |
|
radial clearance |
to 0.1mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
10min/24hours |
|
Packing specification-No. |
50ml bottle 200ml bottle |
Loctite®668 Retaining adhesive
The product is a revolutionary semi-solid formulations holding gum. Patent contamination free packaging enables applications to work with simplicity and portability. Applicable diameter gap to 0.1mm. High temperature to 204 DEG c..
|
Strength requirement |
medium |
|
Cutting Strength |
12.8 |
|
radial clearance |
to 0.1mm |
|
Heat-resistantProperty |
204℃ |
|
Curing time（first/full curing） |
30min/24hours |
|
Packing specification-No. |
19g rod like-40391 |
Loctite®638 Retaining adhesive
Maximum strength. Suitable for high load or cyclic load application operating environment. Capable of holding the radial clearance to 0.38mm cylindrical parts assembly parts. Products can be 10 minutes for fixed.
|
Strength requirement |
high |
|
Cutting Strength |
318 |
|
radial clearance |
to 0.38mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
10min/24hours |
|
Packing specification-No. |
50ml bottle 200ml bottle |
Loctite®680Retaining adhesive
Has excellent resistance to dynamic load performance. Applied to the shaft, gear, pulley and other similar cylindrical parts fixing operation.
NSF / ANSI61 certification
ABS certification.
|
Strength requirement |
high |
|
Cutting Strength |
minimum 19.3 |
|
radial clearance |
to 0.4mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
10min/24hours |
|
Packing specification-No. |
50ml bottle 200ml bottle |
Loctite®603Retaining adhesive
Applicable to the gap to 0.1mm with precision cylindrical parts fixing operation; and in may not thorough cleaning oil operations of the cylindrical fitting part fixing operation. Application of operation includes bearing roller bearing or oiled sleeve fixing operation.
|
Strength requirement |
high |
|
Cutting Strength |
26 |
|
radial clearance |
to 0.1mm |
|
Heat-resistantProperty |
150℃ |
|
Curing time（first/full curing） |
10min/24hours |
|
Packing specification-No. |
50ml bottle 200ml bottle |
Loctite®601
Is a single component, anaerobic retaining compound, in the absence of air conditions, the products in the two complexes of metal surface rapid solidification. Typical use: used for bonding cylindrical matched parts, especially suitable for the requirements of low viscosity.
loctite®620
High viscosity, high strength, does not flow. Holding valve casing, injection machine set, valve cover, cylinder liner, key slot. High temperature resistant to 232 degrees C, the steel to provide 19.0N / mm2 above the shear strength. The locking and fixing the cylindrical fitting to 0.3mm diameter clearance. Preventing the metal fretting wear and corrosion. The seal prevents leakage.
|
Model |
620 |
adhesive material |
Glass,Electronic component,Leather, plastic, rubber, metal, otherMaterial, other |
|
Brand |
Loctite |
Classification of resin |
Polyurethane |
|
Hot melt type |
Packaging hot melt adhesive |
Cutting Strength |
20（MPa） |
|
valid matter≥ |
190（％） |
Period of active use |
60（min） |
|
Working temperature |
320（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-6 |
|
application |
Retaining adhesive |
|
|
loctite®635 adhesive
|
Model |
635 |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal,Timber, other materials, cement products, ceramics, medical category, type of paper, other |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Hot melt type |
Packaging hot melt adhesive |
Cutting Strength |
2700（MPa） |
|
valid matter≥ |
170（％） |
Period of active use |
60（min） |
|
Working temperature |
20（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-7 |
|
Typical viscosity |
100（cps） |
totally Curing time |
24（h） |
loctite®640adhesive
|
Model |
America Loctite640 adhesive |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal, |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Cutting Strength |
2000（MPa） |
valid matter≥ |
100（％） |
|
Period of active use |
10（min） |
Working temperature |
25（℃） |
|
Storage period |
24（month） |
Standard |
JB/T7311-2001 |
|
CAS |
(1996)50C065-072 |
application |
industry |
Loctite®648 adhesive
Recommended for continuous Working temperature up to 175 ℃ place. filling gapto 0.15mm or less. Within the first curing of the 5min.
|
Model |
648 |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal, |
|
Brand |
Loctite |
Classification of resin |
Phenolic resin |
|
Hot melt type |
Furniture, hot melt adhesive |
Cutting Strength |
3625（MPa） |
|
valid matter≥ |
62（％） |
Period of active use |
160（min） |
|
Working temperature |
22（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-7 |
|
application |
air sealant |
|
|
Loctite®661 adhesive
|
Model |
661 |
adhesive material |
Glass,Electronic component,Leather, plastic, rubber, stone type, Metal, |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Cutting Strength |
2175（MPa） |
valid matter≥ |
92（％） |
|
Period of active use |
12（min） |
Working temperature |
25（℃） |
|
Storage period |
24（month） |
Standard |
25057-89-4 |
|
CAS |
SGS MSDS |
application |
Electrical machinery electronic components electronic Hardware Security Instrument |
Loctite®675 adhesive
|
Model |
675 |
adhesive material |
Glass,Electronic component,Leather, plastic, rubber, stone type, Metal, |
|
Brand |
Loctite |
Classification of resin |
Acrylate adhesive |
|
Cutting Strength |
3600（MPa） |
valid matter≥ |
92（％） |
|
Period of active use |
12（min） |
Working temperature |
25（℃） |
|
Storage period |
24（month） |
Standard |
25057-89-4 |
|
CAS |
SGS MSDS |
application |
Electrical machinery electronic components electronic Hardware Security Instrument |
Loctite®680 adhesive
medium viscosity, or for clearance fit transition fit. Retaining sleeve tube, pulleys, gears, rotor. Repair the hole, the shaft with pieces of tolerance parts. In 10min first curing technology. Provided in 24hours after the steel is greater than the 20.7N.
|
Model |
680 |
adhesive material |
Glass, electronic components, leather, plastic, rubber, fiber, stone type,Metal, |
|
Brand |
Loctite |
Classification of resin |
Polyurethane |
|
Hot melt type |
Packaging hot melt adhesive |
Cutting Strength |
4500（MPa） |
|
valid matter≥ |
60（％） |
Period of active use |
170（min） |
|
Working temperature |
20（℃） |
Storage period |
24（month） |
|
Standard |
Enterprise standard |
CAS |
156-62-7 |
|
application |
air sealant |
|
|
